RTO Form 39: MVI Technical Inspection Report (CMVR Rule 62(1))

RTO Form 39 is the statutory document prescribed under Rule 62(1) of the Central Motor Vehicles Rules, 1989. Download official un-watermarked PDF, required document checklists, and filing guidelines.

100% Free Public Civic Utility•Complete 48+ CMVR Schedule•Zero OTP Paywalls•Official Verified PDFs
Form 39Fitness & Inspection1 CopyIssued by Inspecting Officer

MVI Fitness Inspection Report

Technical inspection audit report documenting brake performance, steering geometry, speed limiter calibration, and reflectives.

Central Motor Vehicles RuleRule 62(1)
Submission ModeIssued by Inspecting Officer
Execution Copies1 Copy
Legal AuthorityMoRTH • CMVR 1989
Mandatory Supporting Documents:
  • Speed limiter calibration certificate
  • Reflective tape compliance report
Official Statutory PDF FormatVerified print-ready CMVR format for official RTO submission.
Download Form 39 PDF

Under Rule 62(1) of the Central Motor Vehicles Rules (CMVR), 1989 and Central Motor Vehicles Rules, 1989 & Section 56 of MV Act, 1988, Form 39 (MVI Technical Inspection Report) is the mandatory statutory document for official technical inspection sheet completed by the motor vehicles inspector recording brake efficiency, steering, lighting, emission, and tire safety.

Statutory Purpose & Regulatory Authority

Official technical inspection sheet completed by the Motor Vehicles Inspector recording brake efficiency, steering, lighting, emission, and tire safety. Codified under Central Motor Vehicles Rules, 1989 & Section 56 of MV Act, 1988, this document serves as official legal proof processed by the Motor Vehicles Inspector (MVI) / Authorized Testing Station. It maintains statutory validity of internal statutory record leading to grant/refusal of form 38.

When & Who Must File Form 39

Filled out during the physical and mechanical inspection of transport vehicles.

Mandatory Documents Required with Form 39

  • Form 40 application docket
  • Roller brake tester printout
  • Headlight alignment lux-meter report
  • Exhaust gas analyzer emission printout

Step-by-Step Filing Procedure & Box-by-Box Specimen Guide

Form 39: Official Box-by-Box Specimen Guide

Follow this statutory field-by-field guidance to accurately complete your physical Form 39 (RTO Form 39: MVI Technical Inspection Report (CMVR Rule 62(1))) before submitting to the RTO counter or uploading to the Parivahan portal. Specimen dummy data is provided in bold/italics for illustration.

Box 1
Vehicle Chassis & Engine Telemetry Specimen: Chassis: MA3EW... verified on testing bay sensors

Inspecting officer verifies physical chassis number against VAHAN records.

Statutory Note: Zero chassis tampering or welding marks permitted.
Box 2
Headlight Lux & Optical Alignment Specimen: Luminous Intensity: 35,000 Candela & Alignment: Normal

Automated lux-meter measures beam focus and high/low beam divergence.

Statutory Note: Misaligned headlamps cause inspection failure.
Box 3
Exhaust Smoke Density / Gas Emissions Specimen: Smoke Opacity: 38% / CO: 0.12% (Compliant with BS-VI)

Exhaust gas analyzer or diesel opacimeter test printout attached.

Statutory Note: Must meet statutory emission norms for vehicle age.
Box 4
Steering Geometry & Suspension Health Specimen: Steering Slack: <15mm & Suspension Damping: Balanced

Measurement of kingpin play, tie-rod looseness, and suspension damping balance.

Statutory Note: Defective steering components trigger immediate rejection memo.
  1. Vehicle passes through automated inspection lanes at the testing station.
  2. Sensors measure axle load, side slip, suspension imbalance, and braking force.
  3. MVI inspects structural integrity, emergency exit doors, and fire extinguishers.
  4. All telemetry readings are codified into Form 39.
  5. MVI signs recommendation for grant or refusal of fitness.

Mandatory Execution Copies & Submission Rules

Single official inspection sheet retained in RTO vehicle archive.

Submission mode: Completed by Inspecting Officer / ATS. Ensure all official stamps, authorized signatures, and verified applicant identification documents are legibly attached.

Common Rejection Triggers & Verification Pitfalls

  • Statutory Risk: Headlight beam misalignment exceeding permissible tolerances
  • Statutory Risk: Excessive play in steering mechanism or worn suspension bushings
  • Statutory Risk: Tire tread depth below statutory 1.6mm safety minimum

Official CMVR Statutory PDF Download

Form 39: MVI Technical Inspection Report

Official Un-Watermarked Print-Ready PDF • Central Motor Vehicles Rules (CMVR), 1989

Download Official PDF

Frequently Asked Questions

What components are tested under Form 39?

Form 39 records tests across 20+ parameters including roller brake efficiency, headlight beam alignment, steering slack, suspension damping, exhaust smoke density, and speedometer accuracy.

What happens if a vehicle fails the Form 39 inspection?

The MVI issues a rejection memo specifying the defects. The vehicle owner has 14 days to rectify the defects and present the vehicle for re-testing.

Who conducts the Form 39 technical evaluation?

Only a gazetted Motor Vehicles Inspector (MVI) or certified technical director of an accredited Automated Testing Station (ATS) can execute Form 39.

Statutory & Regulatory Jurisdiction: This documentation is codified under the Central Motor Vehicles Rules (CMVR), 1989 and the Motor Vehicles Act, 1988 as notified by the Ministry of Road Transport and Highways (MoRTH), Government of India. Transport Nagari is an independent public utility portal. All legal, administrative, and data governance inquiries are subject to the exclusive jurisdiction of the competent courts in Hisar, Haryana, India.

Advertisement